Add to Cart
LED Products will step into their Spring for the environment protection, and LED Test Chamber will gain some advantage with the LED Lamps. LED Test Chamber can be seen in a lab of a university or testing center, In a word, LED Test Equipment will help people find good quality products.
Feathers
● GB-2423.1-2008 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50.4-2009 (MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009 (MIL-STD-810D) Damp Heat Test
Specification
Capacity(L) | 800L |
Temperature range | -40℃ ~ +150℃ |
Temp Deviation | ≦ ± 2.0℃ |
Temp Fluctuation | ±0.5℃ |
Ramping and soaking rate | Heating up rate: -40℃↑ +100℃ about 45min (no-load, ambient temperature +25℃) Cooling rate: 20 ℃to -40℃about 60min (no-load, ambient temperature +25℃) |
Humidity range | 20%R.H~98%R.H |
Humidity deviation |
±5.0%RH(≤75%RH) |
Humidity uniformity | 3.0%RH (no-load) |
Humidity fluctuation | ±2.0%RH |
Chamber structure | Overall structure and chamber was composed of three parts as below. Insulation box, separate refrigeration units, and electrical control cabinet. |
Main Material List imported from famous brand
Name | Brand |
Compressor | French Tecumseh |
Oil separator | American Emerson, ALCO, Temprite |
Plate heat exchanger | GEA, Xingsuneng, Guoxing |
press switch | Denmark DANFOSS, Saginomiya |
Condenser | Guangzhou Yongqiang, Klean Air |
Evaporator | Yongqiang |
Dry filter | Denmark DANFOSS, USA SPORLAN |
Capillary tube | KOMEG |
Expansion valve | Denmark DANFOSS, USA SPORLAN |
Magnetic valve | Japan SAGLNOMLYA or Nickideu / Denmark DANFOS |
Controller | KOMEG |
Residual current circuit breaker | Taiwan SHIHLIN |
No-fuse switch | French Schneider |
AC contactor | Japan French Schneider |
KOMEG brand of temperature and humidity test chamber is the ideal simulation test chamber for all heat and cold testing between -40 ºC and 180 ºC temperature range. Well-suited for reliability testing based on current test standards in the temperature range of -40 °C to 150 °C and 10% to 98% RH.Meet all requirements for extreme testing and low temperature alternating climate profiles from -70 °C - 150 °C with humidity.
For more detail information ,kindly contact : anna@komegtech.com whats app ,wechat :+86-18029096856
Photos show