Add to Cart
Single door stainless steel 576L temperature attitude testing chamber
Applications
High and low temperature low pressure is suitable for the product (machine), spare parts, materials of
high temperature, low temperature, high, high and low temperature cycling test and temperature level
test, high temperature test, the test box can be used to test the heat of test samples and non heat
dissipating specimens. For the test of heat dissipation test sample, the radiating power of the altitude low
pressure test chamber can not exceed that of the test box. Because of the dynamic value of refrigerating
volume, it changes with the change of temperature.
Specifications
Model | KU-576S | ||||
Inner Size (D*W*H)mm | 800*700*900 | ||||
Capacity(KW) | 11 | ||||
Chamber Volume(L) | 576 | ||||
Performance | Temp range | -40℃~+150℃ | -70℃~+150℃ | ||
Temp constancy | ±0.5% | ||||
Temp deviation | ≥100℃, ±3.0℃(at constant pressure with empty load) | ||||
<100℃, ±2.0℃(at constant pressure with empty load) | |||||
Cooling rate | 0.7℃~1.0℃/min(Overall average) | ||||
Pressure range | Constant pressure ~1kPa | ||||
Pressure constancy | When ≥40kPa, ±2kPa, 4kPa~40pKa ±0.5kPa, when≤4kPa, ±0.1kPa | ||||
Depressurization rate | Constant pressure~1kPa≤30mins(Normal temp) | ||||
Pressure recovery rate | 10kPa/Min(adjustable) | ||||
Material | Exterior material | Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate | |||
Interior material | Stainless steel(SUS304) | ||||
Pressurized parts | High quality steel plate(Rust proof & Plastic spray treated) | ||||
Insulation material | High quality glass wool | ||||
Cooling System | Compressor | Semi-Hermetic Compressor | |||
Cooling Mode | Water cooled | ||||
Temp regulating method | Balanced Temperature & Humidity Control System (BTHC) | ||||
Pump | Rotary vane type vacuum pump | ||||
Heater | Iron-chrome wire heater | ||||
Sight window | Circular viewing glass incorporating heat generator | ||||
Temp Sensor | Pt-100 | ||||
Controller | Touch Screen Controller | ||||
Safety Devices | Over pressure, over heat and over current protection for compressor, over temp. protection, over load protection for blower, Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm | ||||
Standard Accessory | Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2 | ||||
Power | AC380V/50Hz, 3Phase 5 wires+ Ground Wire. | ||||
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
Standards Implement and Met
GB/T10589-1989Technical conditions for low temperature testing room
GB/T10586-1989Technical conditions of hot and humid testing room
GB/T10592-1989Temperature attitude Testing room
Prouduct Display
Packing and Shipment: