KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
High Accuracy High Low Temperature 3 Zone Thermal Shock Test Chamber
Climatic thermal shock test chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment , that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics ... and other materials can be used as a basis to improve their products or reference.
Thermal shock testing exposes products to alternating low and high temperatures to accelerate failures caused by temperature cycles or thermal shocks during normal use. The transition between temperature extremes occurs very rapidly, greater than 15 °C/min.
Below are differences between3-zone and 2-zone thermal shock chamber:
3-zonethermal shock chamber:
three chamber in total: test space, high temp. chamber and low temp. chamber;
Advantage: slight limitation for test sample’s weight, the test sample keep still, this can reduce the impact to samples by moving it, can be used for on-load testing.
Compared with 2-zone type, relatively low failure rate, low cost.
Disadvantage: long conversion time
2-zonethermal shock chamber:
only two chambers: high temp. Chamber and low temp.chamber
Advantage: short conversion time, smaller space needed
Disadvantage: test sample moving. test samples’ size is limited by the basket size
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Specifications:
| 3 Zone Thermal Shock Test Chamber | ||||||||
| Specifications | Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||||
| Model | KTS-A Series | |||||||
| 72A | 100A | 150A | 200A | 252A | 300A | 480A | ||
| Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 | 800 |
| H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | 800 | |
| D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | 750 | |
| Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
| H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | |
| D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 | |
| Low Temp. chamber | -55ºC~-10ºC | |||||||
| Pre-heat time | +20ºC~-55ºC ,Within 60 min | |||||||
| Test. chamber | -40ºC~+150ºC | |||||||
| High Temp. chamber | +60ºC~+200ºC | |||||||
| Pre-heat time | +60ºC~+200ºC ,Within 20 min | |||||||
| Recovery time | High-Temp Exposure 30 min | |||||||
| Low-Temp Exposure 30 min | ||||||||
| Recovery time within 5 min | ||||||||
| Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection | |||||||
| Standard accessory | Cable port(portΦ50mm)*1, shelves*2 | |||||||
| Interior material | Stainless steel plate(SUS 304) | |||||||
| Exterior material | Baked painting steel or stainless steel(SUS304) | |||||||
| Insulation material | Rigid polyurethane Foam+glass fiber wool | |||||||
| Refrigeration system | Water Cooled | |||||||
| Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) | ||||||||
| Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable | |||||||
| Operation model:Program or fix point running | ||||||||
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. | ||||||||
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | ||||||||
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV | ||||||||
| Ambient Temp. | +5ºC~+35ºC | |||||||
| Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires | |||||||
| 3 Zone Thermal Shock Test Chamber | ||||||||
| Specifications | Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||||
| Model | KTS-B Series | |||||||
| 72B | 100B | 150B | 200B | 252B | 300B | 480B | ||
| Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 | 800 |
| H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | 800 | |
| D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | 750 | |
| Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
| H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 | |
| D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 | |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 | |
| Low Temp. chamber | -70ºC~-10ºC | |||||||
| Pre-heat time | +20ºC~-70ºC ,Within 60 min | |||||||
| Test. chamber | -55ºC~+150ºC | |||||||
| High Temp. chamber | +60ºC~+200ºC | |||||||
| Pre-heat time | +60ºC~+200ºC ,Within 20 min | |||||||
| Recovery time | High-Temp Exposure 30 min | |||||||
| Low-Temp Exposure 30 min | ||||||||
| Recovery time within 5 min | ||||||||
| Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection | |||||||
| Standard accessory | Cable port(portΦ50mm)*1, shelves*2 | |||||||
| Interior material | Stainless steel plate(SUS 304) | |||||||
| Exterior material | Baked painting steel or stainless steel(SUS304) | |||||||
| Insulation material | Rigid polyurethane Foam+glass fiber wool | |||||||
| Refrigeration system | Water Cooled | |||||||
| Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) | ||||||||
| Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable | |||||||
| Operation model:Program or fix point running | ||||||||
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. | ||||||||
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | ||||||||
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV | ||||||||
| Ambient Temp. | +5ºC~+35ºC | |||||||
| Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires | |||||||
| 3 Zone Thermal Shock Test Chamber | |||||||
| Specifications | Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | ||||||
| Model | KTS-D Series | ||||||
| 72D | 100D | 150D | 200D | 252D | 300D | ||
| Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 |
| H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | |
| D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | |
| Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 |
| H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | |
| D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | |
| Low Temp. chamber | -80ºC~-10ºC | ||||||
| Pre-heat time | +20ºC~-80ºC ,Within 60 mins | ||||||
| Test. chamber | -65ºC~+150ºC | ||||||
| High Temp. chamber | +60ºC~+200ºC | ||||||
| Pre-heat time | +60ºC~+200ºC ,Within 20 min | ||||||
| Recovery time | High-Temp Exposure 30 min | ||||||
| Low-Temp Exposure 30 min | |||||||
| Recovery time within 5 min | |||||||
| Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection | ||||||
| Standard accessory | Cable port(portΦ50mm)*1, shelves*2 | ||||||
| Interior material | Stainless steel plate(SUS 304) | ||||||
| Exterior material | Baked painting steel or stainless steel(SUS304) | ||||||
| Insulation material | Rigid polyurethane Foam+glass fiber wool | ||||||
| Refrigeration system | Water Cooled | ||||||
| Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) | |||||||
| Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable | ||||||
| Operation model:Program or fix point running | |||||||
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. | |||||||
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit | |||||||
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV | |||||||
| Ambient Temp. | +5ºC~+35ºC | ||||||
| Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires | ||||||
Main features of Thermal test chamber:
1. Programmable Controller with RS232C, 7 LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3.2PCS stainless steel loading shelves free
4. Multipane viewing window with heater
5. 50mm diameter feed-through port
6. Floor stand with castors.
The controller system features:
Centralized controller, recorder, computer triad controller;
1.Provide USB port, R485 interface, USB download;
2.Large capacity may save 13450 segments, with super long running of 530 hours each segments.
3.Program loop can be 32000 times, tiny loop 32000 times;
4.Large built-in storage, can store 90 - day calendar data, historical curve (when the sample is 1 min)
5.Support English, Chinese and so on.
Refrigeration system characteristics
1. Import compressor, reduce the operating noisy, better performance;
2.The unit module standardization. Set up the bend language manual, ensure that make unity. Cooling line adopts advanced bend language process, ensure refrigeration accurate, uniform;
3.The operation of refrigeration system adopt intelligent control, power consumption is small, all refrigeration parts adopt international famous brand, quality assured for long-term stable operation.
4.Modular making, ease to install, repair and maintenance; Air-cooled condenser of refrigeration unit add the filter net, ensue the normal operation;
5.Intelligent cooling capacity adjustment, good control effect. Wide range of load.
Structure Features
Wall material:Top-grade Carbon Steel Plate,Surface electrostatic color Spray processing
Inner wall material:Stainless Steel Plate SUS304
Body insulation material:Rigid polyurethane Foam + glass fiber
Door insulation material:Rigid Polyurethane Foam + Glass fiber
Material:
Interior material: Stainless Steel Plate SUS304#
Exterior material: Baked Painting Steel Plate or Stainless Steel SUS304#
Insulation material: Rigid polyurethane Foam and Glass Fiber Wool
Packaging:
Climatic thermal shock test chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
