High Performance Big Memory Capacity Thermal Shock Tester , Temperature Testing Chamber
Thermal Shock Chambers Overview:
KOMEG thermal shock chambers meet the demands of today's environmental stress screening with proven performance in installations around the world. Our direct transfer method between hot and cold is an economical method to achieve rapid part temperature change for ESS or thermal shock.
Thermal shock test chamber is requisite testing equipment in metal, plastic, rubber, electronics and other industries. It is used for testing the material structure or composite material’s tolerance degree when exposed instantly in extremely high temperature and extremely low temperature environment continuously, so that whose chemical or physical damage due to thermal expansion and contraction can be detected in shortest time.
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Specifications:
| 3 Zone Thermal Shock Test Chamber |
| Specifications | Note:1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
| Model | KTS-A Series |
| 72A | 100A | 150A | 200A | 252A | 300A | 480A |
| Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 | 800 |
| H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | 800 |
| D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | 750 |
| Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
| H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 |
| D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 |
| Low Temp. chamber | -55ºC~-10ºC |
| Pre-heat time | +20ºC~-55ºC ,Within 60 min |
| Test. chamber | -40ºC~+150ºC |
| High Temp. chamber | +60ºC~+200ºC |
| Pre-heat time | +60ºC~+200ºC ,Within 20 min |
| Recovery time | High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection |
| Standard accessory | Cable port(portΦ50mm)*1, shelves*2 |
| Interior material | Stainless steel plate(SUS 304) |
| Exterior material | Baked painting steel or stainless steel(SUS304) |
| Insulation material | Rigid polyurethane Foam+glass fiber wool |
| Refrigeration system | Water Cooled |
| Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) |
| Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable |
| Operation model:Program or fix point running |
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV |
| Ambient Temp. | +5ºC~+35ºC |
| Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
| 3 Zone Thermal Shock Test Chamber |
| Specifications | Note:1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
| Model | KTS-B Series |
| 72B | 100B | 150B | 200B | 252B | 300B | 480B |
| Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 | 800 |
| H(mm) | 400 | 450 | 500 | 600 | 600 | 600 | 800 |
| D(mm) | 400 | 450 | 500 | 500 | 600 | 650 | 750 |
| Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 | 1850 |
| H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 | 2200 |
| D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 | 2500 |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 | 20 |
| Low Temp. chamber | -70ºC~-10ºC |
| Pre-heat time | +20ºC~-70ºC ,Within 60 min |
| Test. chamber | -55ºC~+150ºC |
| High Temp. chamber | +60ºC~+200ºC |
| Pre-heat time | +60ºC~+200ºC ,Within 20 min |
| Recovery time | High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection |
| Standard accessory | Cable port(portΦ50mm)*1, shelves*2 |
| Interior material | Stainless steel plate(SUS 304) |
| Exterior material | Baked painting steel or stainless steel(SUS304) |
| Insulation material | Rigid polyurethane Foam+glass fiber wool |
| Refrigeration system | Water Cooled |
| Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) |
| Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable |
| Operation model:Program or fix point running |
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV |
| Ambient Temp. | +5ºC~+35ºC |
| Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
| 3 Zone Thermal Shock Test Chamber |
| Specifications | Note:1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
| Model | KTS-D Series |
| 72D | 100D | 150D | 200D | 252D | 300D |
| Interior size | W(mm) | 450 | 500 | 600 | 670 | 700 | 800 |
| H(mm) | 400 | 450 | 500 | 600 | 600 | 600 |
| D(mm) | 400 | 450 | 500 | 500 | 600 | 650 |
| Exterior size | W(mm) | 1490 | 1540 | 1640 | 1720 | 1750 | 1850 |
| H(mm) | 1790 | 1840 | 1890 | 2000 | 2000 | 2000 |
| D(mm) | 1600 | 1700 | 1830 | 1850 | 1930 | 1980 |
| Test weight(KG) | 5 | 10 | 12 | 15 | 18 | 20 |
| Low Temp. chamber | -80ºC~-10ºC |
| Pre-heat time | +20ºC~-80ºC ,Within 60 mins |
| Test. chamber | -65ºC~+150ºC |
| High Temp. chamber | +60ºC~+200ºC |
| Pre-heat time | +60ºC~+200ºC ,Within 20 min |
| Recovery time | High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device | No fuse breaker, over pressureover heat and over current protection for compressor,over temperature protection, over load protection for blower, dry heat protection |
| Standard accessory | Cable port(portΦ50mm)*1, shelves*2 |
| Interior material | Stainless steel plate(SUS 304) |
| Exterior material | Baked painting steel or stainless steel(SUS304) |
| Insulation material | Rigid polyurethane Foam+glass fiber wool |
| Refrigeration system | Water Cooled |
| Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23) |
| Controller | Panel:7-inch LCD Touch panel,Chinese or English display selectable |
| Operation model:Program or fix point running |
| Memory capacity:120programs,1200steps,all repeat 999cycles,part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~5V DCV |
| Ambient Temp. | +5ºC~+35ºC |
| Power | AC 380±10%50Hz ,3 phase 4 wires +Ground Wires |
Thermal Shock Test Chamber Features
1.3-zone design: high temperature zone, cold temperature zone, and testing zone.
2.The test specimens under test are stationary in the testing zone.
3.Touch-control operation interface for ease of use.
4.Max.999H and max.9999 cycles for high or low temperature shock for thermal shock test chamber.
5.Automatic cycling shock or/and manual selective shock are available.
6.Water cooled, binary cooling system for quick cooling effect.
7.Japan imported Seamless Welding Machine, especially for copper pipe welding
Packaging:
Climatic thermal shock test chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
