Horizontal model 2 zone Thermal Shock Testing Chamber , Environmental Testing Labs
A Horizontal Orientation Thermal Shock Chamber has two independently controlled hot and cold zones; one atop the other. A single product carrier moves between each zone, subjecting the product to dramatic changes in temperature.
Thermal shock testing subjects a product to alternating extremes of high and low temperatures in order to observe changes in the product’s characteristics and failure occurrences caused by different materials and thermal expansion.
A product transfer mechanism automatically transfers products under test from zone-to-zone programmed in the controller.
Specifications:
| 2 Zone Thermal Shock Test Chamber IN THE BLANKET: |
| Specifications |
| Model | TST-A Series |
| 72A | 130A | 226A | 360A | 500A |
| Test weight(KG) | 410 | 520 | 610 | 710 | 810 |
| Interior size | W(mm) | 560 | 670 | 770 | 830 | 710 |
| H(mm) | 410 | 520 | 610 | 770 | 860 |
| D(mm) | 300 | 410 | 510 | 610 | 710 |
| Basket size | W(mm) | 300 | 410 | 510 | 730 | 610 |
| H(mm) | 300 | 410 | 510 | 510 | 730 |
| D(mm) | 5 | 5 | 5 | 5 | 10 |
| Low Temp. chamber | -55 °C~ -10°C |
| Pre-cooling time | +20 °C~ -55°C ,Within 60 min |
| Test. chamber | -40 °C~ +150°C |
| High Temp. chamber | +60 °C~ +200 °C |
| Pre-heating time | +60°C~ +200°C ,Within 25 min |
| Recovery time | High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device | within 10 seconds |
| Standard accessory | No fuse breaker, over pressure over heat and over current protection for compressor,
over temperature protection,
over load protection for blower, dry heat protection |
| Interior material | Cable port(portΦ50mm)*1, shelves*2 |
| Exterior material | Stainless steel plate ( SUS 304 ) |
| Insulation material | Baked painting steel or stainless steel(SUS304) |
| Refrigeration system | Rigid polyurethane Foam glass fiber wool |
| Water Cooled |
| Controller | Panel:7-inch LCD Touch panel , Chinese or English display selectable |
| Operation model:Program or fix point running |
Memory capacity:120programs,1200steps ,
all repeat 999cycles , part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~ 5V DCV |
| Ambient Temp. | +5 °C~ +35 °C (41 ~ 95°F) |
| Power | AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires |
Note:1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
| ALL THE MODEL OF THIS KIND PRODUCTS IN THE BLANKET: |
| Specifications |
| Model | TST B Series |
| 72B | 130B | 226B | 360B | 500B |
| Test weight(KG) | 410 | 520 | 610 | 710 | 810 |
| Interior size | W(mm) | 560 | 670 | 770 | 830 | 710 |
| H(mm) | 410 | 520 | 610 | 770 | 860 |
| D(mm) | 300 | 410 | 510 | 610 | 710 |
| Basket size | W(mm) | 300 | 410 | 510 | 730 | 610 |
| H(mm) | 300 | 410 | 510 | 510 | 730 |
| D(mm) | 5 | 5 | 5 | 5 | 5 |
| Low Temp. chamber | -70 °C~ -10°C |
| Pre-cooling time | +20°C~ -70 °C ,Within 60 min |
| Test. chamber | -55°C~ +150°C |
| High Temp. chamber | +60 °C~ +200 °C |
| Pre-heating time | +60°C~ +200°C ,Within 25 min |
| Recovery time | High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device | within 10 seconds |
| Standard accessory | No fuse breaker, over pressure over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection |
| Interior material | Cable port(portΦ50mm)*1, shelves*2 |
| Exterior material | Stainless steel plate ( SUS 304 ) |
| Insulation material | Baked painting steel or stainless steel(SUS304) |
| Refrigeration system | Rigid polyurethane Foam glass fiber wool |
| Water Cooled |
| Controller | Panel:7-inch LCD Touch panel , Chinese or English display selectable |
| Operation model:Program or fix point running |
| Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~ 5V DCV |
| Ambient Temp. | +5 °C~ +35 °C (41 ~ 95°F) |
| Power | AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires |
Note:1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
| ALL THE MODEL OF THIS KIND PRODUCTS IN THE BLANKET: |
| Specifications |
| Model | TST D Series |
| 72D | 130D | 226D | 360D | 500D |
| Test weight(KG) | 410 | 520 | 610 | 710 | 810 |
| Interior size | W(mm) | 560 | 670 | 770 | 830 | 710 |
| H(mm) | 410 | 520 | 610 | 770 | 860 |
| D(mm) | 300 | 410 | 510 | 610 | 710 |
| Basket size | W(mm) | 300 | 410 | 510 | 730 | 610 |
| H(mm) | 300 | 410 | 510 | 510 | 730 |
| D(mm) | 5 | 5 | 5 | 5 | 10 |
| Low Temp. chamber | -80 °C~ -10 °C |
| Pre-cooling time | +20 °C~ -80°C ,Within 60 mins |
| Test. chamber | -60°C~ +150 °C |
| High Temp. chamber | +60 °C~ +200 °C |
| Pre-heating time | +60°C~ +200°C ,Within 25 min |
| Recovery time | High-Temp Exposure 30 min |
| Low-Temp Exposure 30 min |
| Recovery time within 5 min |
| Safety device | within 10 seconds |
| Standard accessory | No fuse breaker, over pressure over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection |
| Interior material | Cable port(portΦ50mm)*1, shelves*2 |
| Exterior material | Stainless steel plate ( SUS 304 ) |
| Insulation material | Baked painting steel or stainless steel(SUS304) |
| Refrigeration system | Rigid polyurethane Foam glass fiber wool |
| Water Cooled |
| Controller | Panel:7-inch LCD Touch panel , Chinese or English display selectable |
| Operation model:Program or fix point running |
| Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles. |
| Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit |
| Input:Temp.:pt-100 Humidity:pt-100 or ~ 5V DCV |
| Ambient Temp. | +5 °C~ +35 °C (41 ~ 95°F) |
| Power | AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires |
Note:1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available |
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Main features of Thermal test chamber:
Direct-drive system for reliable transfer between zones
Compact design with integrated mechanical refrigeration
Two specimen baskets
Includes caster and leveling pads for easy movement
Designed for performance with maximum load
Packaging:
2-zone Thermal Shock Test Chamber are covered with air bubble film before put them into the strong plywoodcase, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, crash-proof, etc.
Company introduction:
Since 1990, manufacturers of custom environmental chambers and standard environmental chambers, Specializing in environmental simulation equipment, ess, walk-in, environmental stress screening, altitude chambers, temperature chambers, temperature and humidity chambers, environmental test chamber manufacturers, humidity chambers, humidity simulation, temperature cycling, thermal test chambers, solar panel test chambers, thermal shock, climatic/climate chambers, vibration test chambers, drive-in chambers, laboratory test chambers, environment test rooms.
Thermal Shock Chambers Brochure-KOMEG.pdf
More information, please visit: www.komegtech.com
