Constant Walk-in Climate Test Chamber Water cooled Walk-In chambers
1. Fabricated cold room;
2. Energy saving design;
3. R404a environment friendly refrigerant;
4. or BOCK compressor
Components:
(1) Condensing unit: , BOCK, Tecumseh
(2) Evaporator: KELTESS air-cooler.
(3) Insulation Panel: PU, EPS.
(4) Other accessories: world-famous brands, like Danfoss, Castle, Every Control, Siemens, LG,Schneider
Doors
1). Swing door and sliding door for choice.
2). Swing door:manual opened,automatic,etc.
3). Door board made with special pressing technology PU material.
4). Door frame:color steel or stainless steel.
5). Surface material:color steel or stainless steel with protecting film.
Panels:
Cold room insulation panel:use 100% polyurethane insulation panel,density about 38~46kg/m3, with gasket,with flame retardant,panel thickness:100mm~200mm, standard width of panel is 960mm
Parameter Specifications:
| Model | KMH-3375S |
| Volume(m³) | 3.375CBM |
| Interior Dimensions | W1500 x H1500 x D1500mm |
| Exterior Dimensions | According to actual design |
| Safety Devices(standard) | No fuse breaker, over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection |
| Standard accessories | Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator |
| Control System | Balanced Temperature & Humidity Control System |
| Refrigeration system | Water Cooled |
| Semi-hermetic compressor, single stage or cascade refrigeration system, |
| CFC free refrigerant ( HFC-507 and HFC-23 ) |
| Controller | Panel | 7-inch LCD Touch panel, Chinese or English display selectable |
| Operation model | Program or fix point running |
| Memory capacity | 120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles |
| Accuracy | Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit |
| Input | Temp.: pt-100, Humidity: pt-100 or ～5V DCV |
| Comm.port | RS-232 or RS-485 ( Softawre is option) |
| Temp. range | Maximum: 80 ºC,120 ºC;
Minimum: -60 ºC, -50 ºC, -40 ºC, -30 ºC, -20 ºC, -10 ºC, 0 ºC |
| Humidity Range | 10%, 20%, 30% ~ 95% |
| Temp. constancy | ±0.5 ºC |
| Humidity constancy | ±2.5%R.H |
| Temp. uniformity | ±2.0 ºC |
| Humidity uniformity | ±5.0%R.H |
| Ambient Temp. | +5 ºC～+35 ºC |
| Wiring method | AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires |
| Heat up time | +20 ºC～+80 ºC, Within 60 min |
| Pull down time | +20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min |
| Interior material | Stainless Steel Plate(SUS 304) |
| Exterior material | Baked Painting Steel Or Stainless steel ( SUS304) |
| Insulation material | Rigid polyurethane foam |
| Door size (mm) | Single wing: W800 x H1800; Double wing: W1600 x H1800; |
| Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available |
(KOMEG often tenders successfully in universities in China)
1)Delicate touch and excellent user experience
2)Unique and compact design, top grade appearance, stable performance and easy operation.
3)Can simulate a wide range of temperature and humidity environments
4)Capable of testing large components, assemblies, and finished products
5)Customized sizes and configurations available
6)1 year warranties
Standard Met and Implemented:
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method 6
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
Temperature and Humidity Test Capabilities
KOMEG have a variety of temperature and humidity chambers from small to walk-in chambers that can reproduce a wide range of climatic conditions incluiding high and low temperature as well as combined temperature and humidity conditions. KOMEG also support a climatic test facility dedicated to tests against requirements for telecoms and radio products.
