KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
Rapid Temperature Change Rate Climatic Test Chamber for Electric Products
Applications:
This equipment is widely applied for electronic and electric products, components, and materials by constant high and low temperature, temperature change, rapid rate temperature change, damp heat, etc environmental simulation reliability test.
Main features:
1. With high precision perfect external design, external with double sides cold-rolled plate electrostatic powder-coated material, internal with SUS#304 high temperature resistant stainless steel.
2. Insulation material adopts fire resistant high strength PU polyurethane foaming thermal insulating material.
3. More than 20% of energy saving is achieved & thanks to the introduction of Japan & German advanced refrigerator control technology.
4. The Control system and control circuit components are introduced with the famous brand.
Parameter Specifications
| KMH-R series
| ||||||
| Model | KMH-R series
| |||||
| 150R | 225R | 408R | 800R | 1000R | ||
| Temp. range | -20°C ～150°C | |||||
| Interior size | W(mm) | 600 | 700 | 700 | 1000 | 1000 |
| H(mm) | 600 | 700 | 750 | 1000 | 1000 | |
| D(mm) | 460 | 480 | 800 | 800 | 1000 | |
| Exterior size | W(mm) | 880 | 980 | 980 | 1280 | 1280 |
| H(mm) | 1730 | 1890 | 1940 | 2160 | 2160 | |
| D(mm) | 1400 | 1460 | 1740 | 1750 | 1950 | |
| Power(KW) | 5.8 | 6 | 7.5 | 12.8 | 12.8 | |
| Weight(KG) | 240 | 280 | 400 | 500 | 580 | |
| Humidity uniformity | ±3.0％R.H | ±5.0％R.H | ||||
| Heat uptime | -20°C ～+100°C, within 35 min | |||||
| Pull downtime | +20°C ～-20°C, within 45 min | |||||
| Humidity Range | 20～98％R.H | |||||
| Temp. constancy | ±0.5ºC | |||||
| Humidity constancy | ±2.5％R.H | |||||
| Temp. uniformity | ±2.0ºC | |||||
| Safety device (standard) | NFB, overpressure,overheat and over current protection for compressor, Over temp. protect, overload protect of the blower, dry heat protection | |||||
| Interior material | Stainless Steel Plate(SUS 304) | |||||
| Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | |||||
| Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | |||||
| Ambient Temp. | +5°C ～+35°C | |||||
| Wiring method | AC 380±10％ 50Hz,3 phase 4 wires +Ground Wires | |||||
| Controller | LCD Touch Screen, Chinese or English display selectable | |||||
| Operation model: Program or fixpoint running | ||||||
| Memory capacity :120programs,1200steps, | ||||||
| All repeat 999 cycles, part repeat 99 cycles | ||||||
| Specifications ( at +20℃ room temp. Or+25℃ water temp with empty load)
| |||||
| Model | KMH-L series
| ||||
| KMH-150L | KMH-225L | KMH-408L | KMH-800L | KMH-1000L | |
| Interior material(cm) | 60*60*46 | 70*70*48 | 70*75*80 | 100*100*80 | 100*100*100 |
| Exterior material(cm) | 88*173*140 | 98*189*146 | 98*194*174 | 128*216*175 | 128*216*195 |
| Weight(Kg) | 250 | 300 | 420 | 530 | 600 |
| Equipment power(KW) | 7.5 | 7.5 | 8.5 | 14.5 | 14.5 |
| Temperature range | -40 ℃ ～ +150 ℃ | ||||
| Humidity range | 20 ～ 98%R.H | ||||
| Temperature constancy | ±0.5℃ | ||||
| Humidity constancy | ±2.5% R.H | ||||
| Temperature uniformity | ±2.0 ℃ | ||||
| Humidity uniformity | ±3.0% R.H(＞75%) ±5.0% R.H (≤75%) | ||||
| Heating rate | -40℃～+100℃ Within 45 minutes | ||||
| Cooling rate | +20℃～-40℃ Within 60 minutes | ||||
| Controller | Touch screen controller English menu Operation mode: setting or program | ||||
| Refrigeration system | Air-cooled (Water Cooled Type is an option) | ||||
| Hermetic compressor, stage refrigeration system | |||||
| Interior material | Stainless Steel Plate ( SUS 304 ) | ||||
| Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | ||||
| Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | ||||
| System | Balanced & Humidity Control System | ||||
| Wiring method | AC 380±10 % 50Hz,3 phase 4 wires +Ground Wires | ||||
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||
| Technical parameters:
| |||||
| Environmental Temperature and Humidity Chamber
| |||||
| Specifications ( at +20°C room temp. Or+25°C water temp with empty load)
| |||||
| Model | KMH-S series | ||||
| 225S | 408S | 800S | 1000S | ||
| Interior size | W(mm) | 700 | 700 | 1000 | 1000 |
| H(mm) | 700 | 750 | 1000 | 1000 | |
| D(mm) | 480 | 800 | 800 | 1000 | |
| Exterior size | W(mm) | 980 | 980 | 1280 | 1280 |
| H(mm) | 1890 | 1940 | 2160 | 2160 | |
| D(mm) | 1460 | 1740 | 1750 | 1950 | |
| Weight(KG) | 330 | 450 | 550 | 650 | |
| Temp. range | -70 °C ~+150°C | ||||
| Humidity Range | 20 ~ 98&R.H. | ||||
| Temp. constancy | ±0.5ºC | ||||
| Humidity constancy | ±2.5%R.H | ||||
| Humidity uniformity | ±3.0%R.H | ±5.0 % R.H | |||
| Heat uptime | -70°C ~ +100°C, within 60 min | ||||
| Pull downtime | +20°C ~ -70°C, within 80 min | ||||
| Equipment Power | 9.5KW | 10.6KW | 18.5KW | 18.5KW | |
| Ambient Temp. | 5ºC ~+35ºC | ||||
| Standard accessories | Sight window*1, cable port(port 50mm)*1, shelves*2, chamber lamp*1, power cable *2m | ||||
| Safety device (standard) | No fuse breaker, overpressure overheat and over current protection for compressor, | ||||
| Over temp. protect, overload protect of the blower, dry heat protection | |||||
| Control System | Balanced Temperature & Humidity Control System | ||||
| Refrigeration system | Air Cooled (Water Cooled Type is an option) | ||||
| Hermetic compressor, Cascade Refrigeration | |||||
| CFC-Free refrigerant(HFC-507/HFC-23) | |||||
| Controller | Panel:7-inch LCD Touch panel, Chinese or English display selectable | ||||
| Operation model: Program or fixpoint running | |||||
| Memory capacity :120programs,1200steps, | |||||
| All repeat 999 cycles, part repeat 99 cycles | |||||
| Interior material | Stainless Steel Plate ( SUS 304 ) | ||||
| Exterior material | Baked Painting Steel Or Stainless steel(SUS304) | ||||
| Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | ||||
| System | Balanced & Humidity Control System | ||||
| Wiring method | AC 380±10 % 50Hz,3 phase 4 wires +Ground Wires | ||||
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||
Company information
Being a first-class supplier and reliable partner, we are certified to ISO 9001 and got CE approval for all our products. All equipment is 7 x 24 hours tested before delivery. That explains why Komeg is the private brand of choice for many well-known brand enterprises, and also one of the very few designated suppliers who were recognized by many top 500 enterprises. Let Komeg's 26 years of professional experience work for you too.
1. Dedicate touch and excellent user experience
2. Unique and compact design, top-grade appearance, stable performance, and easy operation
3. Can simulate a wide range of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
How do I choose a laboratory test chamber/stability chamber?
The many types and sizes of test chambers/stability chambers available underlie the importance of doing your research before you buy. Take the time to define the necessary features for your test procedure or storage needs:
For high-temperature applications, chambers can reach well over 200 °C depending on their material of construction.
Refrigeration options include CO2, with the ability to almost instantly lower a chamber’s temp down to –73 °C, and LN2, to bring it down to –185 °C.
Mechanical refrigeration can be achieved via a single-stage compressor or two-stage cascade type.
Air-cooling condensers are economical, but may heat up the room, and require more space.
Water-cooling condensers do not give off heat, but require a water supply.
Keep the unit’s pull-down and ramp-up time in mind, since many variables affect those numbers, including size, temperature range, and power of the heating or refrigeration system.
Although the most common relative humidity range is 20–98% RH, options such as dry air purge systems can lower this further.
Look for features such as microprocessor-based controllers; autotune; LED, LCD, or touch LCD temp and RH displays; and solid-state RH sensors.
Benchtop, reach-in, and walk-in models are available. Seam welding of the internal chamber walls, as well as a properly fitted door gasket, reduce the chance of leaks.
FAQ
Q1: What is the Warranty for the accelerated aging machine?
A1: For the accelerated aging machine, we offer 1-year warranty service. If any quality problems on our side occurred in this period, we will send you a replacement and cover the cost of shipping and component parts.
Q2: What's the delivery term?
A2: Usually, it takes us 20 - 25 days after order confirmation to produce the equipment and a little bit longer for customization service. While if you are in urgent need, we can make special arrangements to speed up the proceedings. Then we start the shipped by sea, by air freight or by air express.
Q3: What’s the payment term?
A3: T/T, L/C, and other payment terms could be negotiated.
Q4: Is it ok for the customization service?
A4: Yes, the inner chamber dimensions, structure, color, some special parameters can be customized as per your specific request.
