KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
LCD Display Desktop Accelerated Aging Test Chamber For Battery Charger
Applications
This High Temperature Aging Room is designed for products such as switch power, Battery charger, battery, LCD display,motherboard,scanner,monitor,interface card etc under a loading or temperature aging test.
This aging room integrates components and parts such as dual thermal insulated plates with insulation material between them, matched with main distribution cabinet , testing shelves,temperature ontroller,timer,switches,electrical heater,specimen tray, pulling door,air blower,vent blower & socket into a entire system to simulate a high-temperature & hazard environment ( 40℃ ~ 70℃ ± 5 ℃ , Power ON-OFF etc.) , which enables test speciments in a simulated loading test in such an environment with testing time ranges 0-999.9 hours and the defected parts can be detected through this test.
Features
1. High accuracy temperature control performance. Thanks to the unique vent system & electric control system ensure a high accurate temperature distribution that prior to other similar equipments.
2. Wide Temperature range : controllable temperature ranges RT+5℃-80℃ and higher temperature can be customized.
3. Fully protective system ensures the test equipment run for a long time with less failures.
4. Advanced structure design with high performance component and parts ensures a long,stable,safe and reliable test demand and also easy to operate and maintain.
5. Famous branded components are introduced to this test equipment to guarantee a top-class quality and performance.
6. Attractive appearance,easy to install and operate.
Specifications
| Specifications | |
| Interior dimensions(W*H*D) mm | 1500*1280*550 |
| Exterior dimensions(W*H*D) mm | 1720*1980*750 |
| Temp. range | Room Temp. +20～+100℃ |
| Temp. constancy | ±0.5℃ |
| Temp. uniformity | ±3℃ |
| Test. capacity | 88PCS/CYCLE(Custom made available) |
| Dimension | 100W*100HJ*50D(MM) |
| Test range | FAN(full machines number) |
| Voltage range | 3～50V |
| Current range | ±5% |
| Speed | 0-15000RPM,±8% |
| The detection speed | 7-12sec/cycle |
| Note:
1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |
1, adopts multi-fin, centrifugal horizontal heat exchange circulation system, fresh air change rate can be adjusted.
2, Internal rotating pan can be conveniently removed or switch to loading shelves, motor rotating speed of hanging shelf is 8-10rpm.
3, Equipped with digital watt-hour meter, be able to measure air changing volume.
You are warmly welcomed to KOMEG.
We hope to be your reliable business partner in China.
For our new design can achieve high temp. Unifornity (± 0.5 C ).
Tecumseh or Danfoss compressor for your alternative choice.
Germany imported wall material make sure the reliability and good performace.
Related Products
Programmable Temperature & humidity testing Chamber
Triple layer Type Temperature & humidity Chamber
Temperature & humidity Control Host
Air Thermal Shock Tester
Liquid Thermal Shock Tester
Salt Spray Tester
Walk In environmental Testing Room
Temperature & humidity & Vibration Combined Testing Chamber
Aging Oven Tester
Rain/Spray Testing Chamber
Burn-in testing equipment, Dust Tester
Steam Aging Tester, Dispensing Robots
Electromagnetic High Frequency Vibration Tester
Tensile Tester, Drop Tester, Precision Oven Tester, etc.
Q1: What is the Warranty?
Generally, 12 months warranty. But for drying oven, the warranty is 18 months. If any quality problems on our side occured in this period ,we will take on the cost of shipping and component parts.
Q2: What's the delivery term?
Usually, 20 - 25 days after order confirmation. It will be took more time for customization service. If you are in urgent need, we can make special arrangement for you. It could be shipped by sea, by air or by air express.
Q3: What’s the payment term?
Accept different kinds of payment terms, such T/T, L/C, Paypal.
Q4: Is it ok for customization service?
Of course you can. We are manufacturer of environmental test equipment. Once with your detailed requests, we could make environmental test chamber accordingly.
