KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
Laboratory Walk-in Temperature Humidity Test Chamber With Large LCD Display Screen
OEM are welcome
| Ⅰ. Product Overview
| |
| Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat and damp. | |
| Ⅱ. Application
| |
| Suitable for electrical, electronics, machinery and other products, parts, materials, etc. under high or low
temperature, simulating temperature humidity change conditions on the products, parts, materials
quality and reliability testing. | |
| Ⅲ. Features
| |
| ● GB-2423. 1-89 (IEC68-2-1)Test A: Low Temperature Test
● GB-2423. 2-89 (IEC68-2-2)Test B: High Temperature Test
● GJB360. 8-87 (MIL-STD. 202F) High Temperature Life Test
● GBJl50. 3 (MIL-STD-810D) High Temperature Test
● GJBl50. 4 (MIL-STD-810D) Low Temperature Test
● GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test
| |
| 1．Easy Operation | sing SAMWONTECH color touch screen controller with PID control
parameters setting
Flexible approach for data collection and recording |
| 2．High reliability | Key parts are imported, ensuring the service life and high reliability
Efficient oil separator to ensure the service life of the compressor |
| Ⅳ. Technical specification
| |
| Water-cooled, water temperature at +25 ℃, no load.
| |
| 1. Temperature range | -40～+80℃
|
| 2. Temperature deviation | ±2℃
|
| 3. Temperature Uniformity | ±2℃(no load)
|
| 4. Temperature fluctuation | ±0.5℃(no load, central point)
|
| 5. Heating up time | -40℃ to +80℃, 2℃/min no load
|
| 6. Cooling up time | +80℃ to -40℃, 1.5℃/min no load
|
| 7. Humidity range | 40% to 98%R.H.
|
| 9. Humidity deviation | ±3.0％RH (＞75％RH)
±5.0％RH (≤75％RH) |
| 10. Humidity fluctuation | ±2.5％RH (no load)
|
| The above specifications is measured in the environment of + 25 ℃, temperature and humidity
performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in
the air outlet. | |
| Ⅴ. Chamber Structure | |
| 1. test space dimension | W 2200 × H 2200 × D 2000 mm volume: 9680L
|
| 2. external dimension | Approx. W2500 × H 2600 × D 3750 mm
PS: not including external dimensions protruding part
|
| 3. Internal material | Stainless steel plate (SUS # 304)
|
| 4. External material | External material use sheet metal plating, PE paint
|
| 5. Insulation material | High-density rigid Polyurethane foam, PU Panel thickness of 150mm
|
| 6. Bottom plate | Chamber bottom plate reinforcement, Bearing capacity: over 3000 KG.
|
| 7. Ramp | Ramp: 1 ea, convenient for test samples (Optical fiber cable) access
|
| 8. Door | Double open door, W (1000 + 1000) x H2000mm,
With two observation window of W400 x H500mm;
With anti-lock buckle, the door can be opened from inside
|
| 9. Cable holes | three ψ80mm cable holes, 2 on the left side and 1 on the right side
with rubber stopper and plastic cover |
| 10. Light | Indoor temperature resistance and moisture-proof light * 4 , with
explosion-proof lamp shade, on the wall
|
| 11. Heating | Quality nickel-chromium alloy wire electric heaters,
Non-contact control mode (SSR). |
| 12. Humidifying | Stainless steel sheathed heater, steam humidifying, corrosion-
resistant,
Non-contact control mode (SSR). |
| 13. Water complement system | Water pump supply water automatically
|
| 14. R.O. Water Purifier | User need to provide tap water of 1 ~ 2kg / cm2
|
| 15. Pressure Equalizations Port | Test chamber with one pressure equalization port, ensuring the inside
and outside pressure balance |
| 16. Test sample | Optical fiber cable, complete drum in the chamber,
Max weight is approx. 2.5 ton |
Photos show
