KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
Automobile Parts Environment Tester Universal Lab Salt Fog Chamber Programmable Salt Spray Test Chamber
Product Description
The salt spray tester is used to test the corrosive resistance of products whose the surface was treated
with paint, electroplating, an inorganic and organic film, anode handling, anti-rust oil, etc.
a. The tester is used for detecting corrosion resistance of the surface of various materials
b. It is widely used
c. It is easy to operate and maintain.
Feature
1.Entire PP&PVC solid mechanical structure, resistance to hydrochloric acid, heat resistance and never aging, suitable for salt fog copper acetate, etc.
2. Patent nozzle and conical diffusion device make the fall fog rapidly and evenly. With manual level automatic control mode, the biggest setting time can reach 9990 hours.
3. Have automatic demist device, can clearly observe tested products after the experience is finished.
4. Three complete temperature control systems(Saturated air temperature, the temperature in the cabinet, the test liquid temperature) ensure the consistency and standards of the test.
5. Economic button type controller and programmable touch screen controller are available.
6. Set salt spray test condition according to IEC 68-2 11, DIN EN ISO 9227, ASTM B117, JIS Z2371, JIS K5400 and another related test standard.
Specifications:
| Specifications (Note: We reserve the right to change specifications without prior notice) | ||||
| Model | HL-160-NS | HL-120-BS | HL-90-BS | HL-60-SS |
| Interior dimensions(W*H*D)mm | 1600 X 500 X 1000 | 1200 X 500 X 800 | 900 X 500 X 600 | 600 X 400 X 450 |
| Exterior dimensions(W*H*D)mm | 2240 X 1500 X 1600 | 1410 X 1280 X 880 | 1460 X 1280 X 910 | 1130 X 1070 X 630 |
| Test space Volume(L) | 800 | 480 | 270 | 108 |
| Salt Water Tank Volume (L) | 60 | 40 | 25 | 15 |
| Heater | 15KW+1KW | 11KW+1KW | 7KW+0.75KW | 3KW+0.75KW |
| Air compressor | 2HP | 2HP | 1/2HP | 1/2HP |
| Temp. range (Testing barrel) | 35±1℃～50±1℃ | |||
| Temp. range (Pressure barrel) | 47±1℃～63±1℃ | |||
| Test applicable | NSS, ACSS,CASS,CORK | |||
| Pressed Air Pressure | 1.00±0.01kgf/cm² | |||
| Spray Amount | 1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average) | |||
| Ambient Relative Humidity | More than 85%R.H. | |||
| PH Value | 6.5~7.2 3.0~3.2 | |||
| Spraying Manner | Programmable Spraying | |||
| Power | AC220V 1Φ 50Hz | |||
Structure(figure1)
Instruction:
(1) Spray tower
(2) Funnel cup
(3) Touchscreen controller
(4) Regulator
(5) Pressure gauge
(6) Metering cylinder
Controller(figure 2)
Controller instruction:
(1)Chamber real-time temperature
(2)Chamber temperature setting
(3)Actual test time
(4)Test time setting
(5)Accumulative time
(6)Power switch
(7)Machine start/stop working button
(8)Spray start/pause button
(9)Test chamber low water alarm
(10)Defog after test
(11)Saltwater tank low water alarm
(12)Reduce setting value
(13)Increase setting value
(14)Pressure barrel low water alarm
(15)Non-spray time setting
(16)Spray time setting
(17)Pressure barrel temperature setting
(18)Pressure barrel real-time temperature
Control system:
Test chamber temperature control: Control the chamber temperature, according to standard, NSS AASS test is 35℃, and CASS test is 50℃.
Pressure barrel temperature control: Control the saturated air barrel temperature, NSS AASS is 47℃, CASS test is 63℃.
NSS AASS Test:Chamber temperature set 35℃, Pressure barrel temperature set in 47℃(40℃-50℃).
CASS test :Chamber tember temperature set 50℃, Pressure barrel temperature set 63℃(60℃-70℃).
Power switch: Control the whole machine power. Long press for power on or off.
Start/stop switch: Control the heating system of the test chamber, heat sink, and Pressure barrel.
Spray/pause switch: control the spray system.
Defog switch: control defog system, clear the salt mist in the chamber after the test.
Test chamber low water alarm: When the water level is low, the light will flicker. Add pure water into the test chamber until the light doesn't flicker.
Saltwater tank low water alarm: When the salt water level is low, the light will flicker. Add salt water into the saltwater tank until the light does,t flicker.
Pressure barrel low water alarm: When the water level is low, the light will flicker. Add pure water into the pressure barrel until the light doesn't,t flicker.
Illustration on the back of the salt spray tester
Our Services
We are online 24 hours, your any questions will get timely effective treatment and recovery.
Transport
Depending on the size of the order and its destination, we will find the most efficient way of delivering your order. Collect shipments through your account at UPS, FedEx, freight forwarder of choice or other can also be arranged. Let us know of such arrangements with your Purchase Order.
Quotes and Orders do not include customs duties and taxes as they vary from country to country and are the sole responsibility of the buyer.
FAQ
1. Q: Have your machine met relevant standards, and with relevant TEST CERTIFICATE?
A: Yes, our machines are manufactured according to International Standards. If TEST CERTIFICAT required, it can be offered.
2. Q: How-to video provided?
A: Yes, if required, our engineers will record a specialize how-to video for you.
3. Q: Is the machine made in your own plant?
A: Yes, welcome to visit our plant(factory), also we support OEM and ODM.
4. Q: How you do the maintenance oversea?
A: In the way, you are convenient, by Telephone or E-mail or Video meeting etc.