Hospital Vacuum Drying Equipment With Digital Display / Control CE Approved / Universal High Temperature 300℃ Laboratory
Product Description
Precise oven or cabinet dryers are mostly used for drying, baking, sterilization of non - volatile items and
heat Treatment test for mining enterprises, schools, medical and scientific research. Especially for
simultaneous Drying of different kinds of polymersin small quantities for drying materials for trial molding.
They can also be Applied in electronic engineering, electroplating, and pharmacy, paint baking, printing
industries, etc. For Preheating or drying related products.
Product Features
1,Nominal temperatures 250/300/350/400 °C;
2,Outer casing made of galvanized sheet steel, with coatingblue, white color;
3,Corrosion-resistant inner casing made of galvanized sheet steel;
4,Low external wall temperature and minimal loss of energy due to highquality, generously dimensioned
thermal insulation of rock wool;
5,Grid rails in working chamber, facilitating height adjustment of wire-mesh shelves and grates;
6,The temperature-resistant door gasket is easily exchanged;
7,Door of walk-in units can be opened from inside;
8,Tubular heating elements made of stainless steel;
9,Safety temperature limiter (protects unit);
10,Microprocessor-based temperature controller with solid state relays ensures minimal control
fluctuations;
11,Control panel with additional display and control elements which can be upgraded, thanks to its
modular construction;
12,Exemplary air ducting system which enables an incredibly even temperature distribution to be
achieved, even with a fresh air supply. The air in the working chamber is mixed in this system with fresh
air sucked in via a heating register, mixed by the circulating air fan and conveyed once more to the
working chamber.
13,Air exchange via air intake and exhaust flanges. Air intake flanges are closed by delivery.
Product Specifications
| Model | KOV-1000A | KOV-1394B |
| Inside Dimension (cm) | W90*H110*D100cm | W120*H132*D88cm |
| Outer Dimension | W126*H188*D129cm | W160*H207*D110cm |
| Temp.range | RT +20℃~200 ℃ | RT +20℃~300 ℃ |
| Temp.fluctuation | ±1℃ | ±1℃ |
| Temp.uniformit | ±2.0 ℃(50~100℃)/± 3.0 ℃(101~200 ℃) | ±2.0 ℃(50~100℃)/± 3.0 ℃(101~250℃) |
| Heating uptime | 50 ℃~200 ℃ 50 min | 50 ℃~250 ℃ 70 min |
| Inner case material | Stainless steel | Stainless steel |
| Outer case material | Cold paint | Cold paint |
| Insulation material | Mineral Wool | Mineral Wool Insulation 120mm |
| Protector | NO-fuse Switch,Overheat Protector |
Standards Met and Implemented:
GB-2423．2-89(IEC68-2-2)Test B: High Temperature Test
GJB360．8-87(MIL-STD．202F) High Temperature Life Test
GBJl50．3(MIL-STD-810D) High Temperature Test
Photos show
Product Packaging
Each set protected with resin fiber and PP film, then put into strong wooden
case with operation mannual and video inside.
Product After-sale service
If you face any problems in future during testing process we promise we will
give you a reply within 48 hours and solution provide within 3 working days. We
can offer operation video and English operation muanual. We can provide
video-conference. If customers require on-site service, the transport and travel
expense shall be borne by customer.
