KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
Temperature range -70 ℃ ~ +150 ℃ 1000L single door temperature and humidity test chamber
Product Overview
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat.
Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research
institution, inspection and quarantine bureau, university etc..
Specifications
| Chamber | |
| Workspace volume | IW 1000 × IH 1000 × ID 1000 mm |
| Exterior size | EW 1200 × EH 2035 × ED 2050 mm |
| Temperature | |
| Temperature range | -70 ℃ ~ +150 ℃ |
| Temp Deviation | ≦±2.0℃ |
| Temp Constancy | ±0.5℃ |
| Temp Uniformity | ≦2.0℃ |
| Ramping and soaking rate | -70℃↑ +100℃ within 60 mins (no-load) |
| Humidity | |
| Humidity range | 20%R.H.～98%R.H |
| Control range |
|
| Humidity deviation | ±3.0％RH(＞75％RH) |
| Humidity uniformity | ±3.0％RH(no-load) |
| Humidity constancy | ±2.0％RH |
| Temperature and humidity performance measurement comply with related regulation of IEC60068-3-5 standard; Sensors placed in the air outlet. | |
| Ⅴ. Chamber Structure | |
Overall structure and chamber was composed of three parts as below. | |
| Insulation box | ※ wall material: high-quality carbon steel with static color spray |
| Door | Single door, left open,Heating wire was installed at the door frames to prevent condensation at low temperatures. |
| Observation window | With 1 set 460 × 560mm (width × height) observation window, multi-hollow electric insulation coated glass prevent condensation effectively |
| Cable port | Φ50mm*2 located on both sides (each*1) with rubber stopper and plastic cover |
| Lighting device | 11W/AC220V *1 located on observation window |
| Heating | Quality nickel-chromium alloy wire electric heaters, |
| Humidifying | Steam heating and humidification method; |
| Water outlet hole | Available for drain the condensate water |
| Sample holder | Two layers of stainless steel sample holder.Layer height adjustable, Bearing weight 30kg/ layer |
| Mobile Casters | Mobile Casters *4 with foot cups |
| Electric control box | Total power circuit breaker, over-temperature protection. |
| Water supply system | Water pump automatic supply |
Environmental test chamber Standard
● GB-2423．1-89(IEC68-2-1)Test A:Low Temperature Test
● GB-2423．2-89(IEC68-2-2)Test B:High Temperature Test
● GJB360．8-87(MIL-STD．202F) High Temperature Life Test
● GBJl50．3(MIL-STD-810D) High Temperature Test
● GJBl50．4(MIL-STD-810D) Low Temperature Test
● GB2423．3-93(IEC68-2-3)Test Ca:Constant Heat Test
● GB2423．4-93(IEC68-2—30)Test Db:Damp Heat Alternative Test
● GJBl50．9-93(MIL-STD-810D) Damp Heat Test
Product details
Packing and Shipment:
After-sales Service and Training
Charge-free warranty will last for 1 year from the date of equipment acceptance. After the warranty
period, the user will be charged properly. Irregular examination and life-long service are available;
Note: If needed, provide 2 operators for on-site installation and training