KOMEG Technology Ind Co., Limited
KOMEG Technology Ind Co., Limited Top Brand Climatic Test Chamber Since 1990
Add to Cart
125L Environmental Temperature Altitude Testing Chamber With Windows
Product Overview
This series is applicable to the reliability test and production of industrial products, with the characteristics
of high temperature control accuracy and wide control range, performance index accords with
GB5170.2.3.5.6-95 "electrical and electronic products environmental testing equipment basic parameter
calibration method of high temperature test equipment” required standards.
Specifications
| Inside size | W 500 × H 500 × D 500mm |
| Outside Size | Approx.W 1210 × H 1610 × D 1834 mm (not including the protruding part) |
| Wall material | high-quality carbon steel with static color spray |
| inner wall material | SUS304 # matte stainless steel plate. |
| Insulation materials | rigid polyurethane foam insulation layer + glass fiber. |
| Door | Single door, left open,Heating wire was installed at the door frames to prevent condensation at low temperatures. |
| Observation window | With 1 set W210 X H270mm (width × height) observation window.Lighting inside |
| Water outlet hole | Automatic condensate removal system installed at the bottom of the cabinet. |
| Cable hole and terminal | On the left side of the box, there are 1 lead hole diameter Φ100mm; one glass sealing joint (24 core 10A) flange. |
| Manual inflation valve | Manual inflation valve for manual pressure relief in the event of a power outage. |
| Sample holder | Two layers of stainless steel sample holder,Height adjustable,every holder could load 30KG. |
| Air heater inside the box | Fin heat pipe type stainless steel electric heater. |
| Heater control mode | SSR (Solid State Relay) has no periodic periodic pulse width adjustment. |
| Vacuum pump. | SV 25B 3φ 380V Leybold (including oil mist filter) 1 set. |
| Vacuum sensor | Vacuum sensor: UNIK 5072 (GE, USA) Measuring range: 0~200KPa Comprehensive accuracy: ±0.2% FS.BSL Output: 4~20mA Pressure interface: G1/4 internal thread |
Standards Met and Implemented:
GB - 2423.2-89(IEC68-2-2) Test B: high temperature test method
GJB360.8-87 (MIL - STD. 202 F) High temperature life test
GJBl50.3 (MIL - STD - 810 - D) High temperature test method
Meaningful picture
Packing and Shipment:
1,Pre-sales service
Before the purchase, our company will provide customers with detailed product-related information, and
welcome you to visit the company and check the goods.
2,After-sales service
After the completion of the transaction, our company will be arranged different after-sales service
according to the ease of the goods , and even arrange work engineers on-site service.
3,Warranty period
Our product warranty is 12 months and we are committed to responding within 48 hours of the problem,
providing a solution.