
Add to Cart
150L Temperature and Humidity Testing Chamber With LCD Touch Screen Controller
Prouduct Specifications
Volume | W 600× H 600 × D 460 mm |
Exterior size | W 880× H 1730× D 1400mm |
Temperature range | -20 ~ 150 ℃ |
Temp deviation | ±2.0℃ |
Temp constancy | ±0.5℃ |
Temp uniformity | ±0.5℃ |
Temperature change rate | -20℃ ↓ +100℃ within 45 min(no-load) +20℃ ↑ -20℃ within 60 min(no-load) the temperature change rate is 5°C/Min |
Observation window | With 2 sets 350 × 500mm (width × height) observation window, multi-hollow electric insulation coated glass prevent condensation effectively |
Cable port | Φ50mm*2 located on both sides(each*1) with rubber stopper and plastic cover |
Product Overview
Able to accurately simulate a wide range of complicated natural environments, and is suitable for
reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental
testing equipment and test methods for the basic parameters of electric and electronic products under
the condition of humidity, low temperature, high temperature, and constant heat.
Prouduct Application
Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical
appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research
institution, inspection and quarantine bureau, university etc..
Environmental Test Chamber Standards
● GB-2423.1-89(IEC68-2-1)Test A:Low Temperature Test
● GB-2423.2-89(IEC68-2-2)Test B:High Temperature Test
● GJB360.8-87(MIL-STD.202F) High Temperature Life Test
● GBJl50.3(MIL-STD-810D) High Temperature Test
● GJBl50.4(MIL-STD-810D) Low Temperature Test
● GB2423.3-93(IEC68-2-3)Test Ca:Constant Heat Test
● GB2423.4-93(IEC68-2—30)Test Db:Damp Heat Alternative Test
● GJBl50.9-93(MIL-STD-810D) Damp Heat Test
Prouduct Display
Packing and Shipment:
For more detail information ,kindly contact : annie@komegtech.com whats app ,wechat :+86-
13726402801,QQ:471558353